Please read the label on the bottle to identify the right serving size for your dog.
- Optionally, with a piece of tape, mark the line you will fill the bottle to. This may make it easier to see the fill line you desire. A waterproof marker could also be used.
- Loosen the cap and leave on the bottle (this keeps the oil free from dust).
- With the bottle on a flat surface, carefully squeeze the bottle until it fills to the desired mark.
- Remove the cap.
- Pour the bottle opposite the fill tube (towards the flat plane of the bottle directly into the dog’s food. The bottle can be held at a 90 degree angle so that the flat edge is parallel to the floor.
- If you want every drop out of the chamber, this requires about 30 seconds, and up to 30 drops of oil after the original pour.
- The chamber is completely empty and there is no oil on the outside of the bottle.
- Recap the bottle of oil tightly.
All our packaging is MCT oil compatible.
It would be easier to use a pouring spout or pump system, but then soft plastics are used in the inner workings of the mechanism, and the MCT oil will melt the plastics.